BOX_HEADING_MENU

BMW S85B50 (V10)

  • SP1527HK-STD-S85
    SP1527HK-STD-S85
    SP1527HK-STD-S85 Applicable for BMW engines S85B50 Standard clearance (+0.001's also available) Sold as complete set (10-cylinders) Designed and manufactured by Clevite to BE Bearing specifications. These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear and can cause early engine failure.  Furthermore, the... SP1527HK-STD-S85 Applicable for BMW engines S85B50 Standard clearance (+0.001's...

    BACKORDERS ONLY
    We expect this to be in stock on
    Friday 28 December, 2018.

    $734.00

  • SP1527HK-STD-1CYL
    SP1527HK-STD-1CYL
    SP1527HK-STD-1CYL Applicable for BMW engines S65B40, S85B50 Standard clearance (+0.001's also available) Sold as individual cylinder (mix/match with +0.001 bearings to dial in clearance) Designed and manufactured by Clevite to BE Bearing specifications. These bearings replace the factory BMW rod bearings. The original BMW bearings have too little clearance, which leads to premature bearing wear... SP1527HK-STD-1CYL Applicable for BMW engines S65B40, S85B50 Standard clearance ...

    BACKORDERS ONLY
    We expect this to be in stock on
    Friday 28 December, 2018.

    $80.00

  • BE-CRB50-S85
    BE-CRB50-S85
    BE Rod Bolts Designed by BE Bearings, manufactured by ARP.  These custom made rod bolts are designed to be used on BMW factory connecting rods.  BE Bearings worked with ARP to come up with custom rod bolt torque specifications to ensure minimal rod big end bore distortion.  Our bolts have been measured and verified to guarantee minimal bore distortion, and stay within the ARP... BE Rod Bolts Designed by BE Bearings, manufactured by ARP.  These custom m...
  • BMW-RBLT-S85B50
    BMW-RBLT-S85B50
    BMW OEM Rod Bolts These are BMW factory (OEM) rod bolts, purchased in quantity at wholesale prices from BMW.  The OEM rod bolts have a more complicated torque setting than aftermarket bolts and therefore take a little longer to install.  Once used in an engine, the must be discarded and replaced. Technical Details: Composition BMW Factory, composition unknown Part Number 11 24 7... BMW OEM Rod Bolts These are BMW factory (OEM) rod bolts, purchased in quantity ...
  • BE-VS-S85
    BE-VS-S85
    Designed by former BMW M-Engine designer.  These valve springs offer increased lift, seat pressure, and higher RPMs over stock valve springs. BE-Design valve spring features: 64% higher seat pressure 34% higher pressure @ 0.450 inch lift 37% room for more camshaft lift Designed by former BMW M-Engine designer.  These valve springs offer incre...